|
GUEST
初哥級
Posts 0 |
 Posted - 18.04.2002 : 18:46:17
|
我幾個月前買左支19安Riley，朋友教我(開cue)用砂紙磨走cue表面的啜手光油，磨去初時，支cue的確好正，一點都冇啜手，旦打打吓又開始啜番，用布清潔完都仲係啜，要用砂紙再磨先至正番，長此下去支cue咪好易變左支針？請問我是否應該保留新cue的光油？我應該點樣令支cue唔啜手？
多謝幫忙！
|
|
|
GUEST
初哥級
Posts 0 |
Posted - 19.04.2002 : 04:20:00
|
|
其實用用過0既百潔布,輕輕磨走cue表面的小小光油,再用cue oil(或小小bb oil都得)就得嫁啦!雖然用砂紙磨去初時，支cue的確好正!!但支cue無0左光油0既保護,都好快打柴嫁!同支cue因為無0左光油0既保護,0的木其實都好快會dirty啜手嫁,用0下cue oil 啦!睇0下得唔得啦!!(我都想知可以點做,有無高手可以講比我0地知呢??thx) |
 |
|
|
snooker
初青會員
Hong Kong
Posts 229 |
Posted - 19.04.2002 : 04:59:28
|
Hi,
Normally before & after the games I use a damp cloth to clean the cue and immediately use a dry cloth to wipe it dry. This way the cue will stay clean and smooth. And from time to time you may also use cue oil to protect the shaft too, give it time to 'soak' into the wood, then buff it dry with a clean cloth, but if you use it excessively, you may feel it slightly sticky. It will soon feel smooth through the regular wiping with a dry cloth.
Remember NOT to rub the shaft of your cue with sandpaper. This will just destroys the finish and scratch the surface of the cue. Thus effect the stability of the wood.
Anyone have other suggestions??
Cheers,
Felicia
|
|
|
|
GUEST
初哥級
Posts 0 |
Posted - 19.04.2002 : 19:21:23
|
多謝wingb同Felicia回答！
唉∼我諗我又要開始儲錢買下一支cue咯！ |
|
|
請問新cue應該點處理？
