|
Ar Sing
初哥級
Posts 16 |
 Posted - 09.09.2003 : 10:43:17
|
|
|
|
Dickson
隊長級會員
Hong Kong
Posts 10479 |
Posted - 09.09.2003 : 11:07:13
|
|
唔記得擦chalk、打得太低或者出cue 時手肘向下沉令cue 的前端向上挑起。 |
 |
|
|
william
初青會員
Canada
Posts 382 |
Posted - 09.09.2003 : 11:15:45
|
|
keep ur cue horizontal any time even it is not ur turn |
|
|
|
chilli
少校級會員
Posts 662 |
Posted - 09.09.2003 : 14:39:21
|
remember to keep your body level when you are aiming the shot, and also timing is a key point for hitting a back spin shot.
低Q王 |
|
|
|
bigjason
少校級會員
Posts 684 |
Posted - 10.09.2003 : 00:29:34
|
唔記得擦chalk粉!
 :92> |
|
|
|
Ar Sing
初哥級
Posts 16 |
Posted - 10.09.2003 : 10:59:03
|
|
其實我已盡量降低枕手, 令支Cue跟檯面平行, 而並不是插下去. 個波跳起, 是不是力度做得不好的問題呢 ? |
|
|
|
Ar Sing
初哥級
Posts 16 |
Posted - 10.09.2003 : 11:12:56
|
|
我覺得扯後係好大學問, 因為我自已都控制唔到白波會退後幾多, 唔係大力佢便退後遠D. 我覺得好難做到隨心所欲, 想退後幾多吋就有幾多吋, 請問點練呢? |
|
|
|
chilli
少校級會員
Posts 662 |
Posted - 10.09.2003 : 13:21:21
|
|
It is actually hard to control how far you can draw your cue ball, but what I know is not to hit too low of the cue ball, try to hit between the center and 6:00 (the lowest point) Try and practise. |
|
|
|
nman
初哥級
Posts 24 |
Posted - 02.12.2003 : 02:12:49
|
以下只係我個人經驗:
1. 打白波正中間同最低點中間;
2. 枕手唔應該太低, 同正常差唔多就得;
3. 出Cue 時少少提高後手位, 打波白波, 最理想出完Cue 後支Cue 係貼住張(木台);
之後當然要經常練習啦! |
|
|
|
lee111
初哥級
Posts 1 |
Posted - 09.12.2003 : 18:05:53
|
1) you hit the lowest part of the ball !
2) the power of the cue action too strong!
3) use chalk everytime when you want to screw back!
correction :
1) you hit the point of the cue ball about 9-10mm apart from the table.
2) the speed for the cue should be as fast as possibe ( not use power, is the speed of the cue ! remember! o.k.)
3) shorter bridge (about 3-4 nos.of cue ball distrance)
|
|
|
|
Des5
初青會員
Posts 67 |
Posted - 09.12.2003 : 22:17:40
|
我之前勁練打低cue既時候都會有時有呢個問題...
多數係都係因為打得太低...
其實我都見倒有D人..
打低cue既時候aim果時aim得低過真係打果個point...
所以我開頭打都以為係要打好低既...
不過而家改左好好多喇...
上面果個人講呢樣野我唔係好認同:
3) shorter bridge (about 3-4 nos.of cue ball distrance)
我開頭打低cue出唔倒都係因為隻枕手太埋個白波...
其實我決定係因人而異既....
因為我而家打低cue既時候隻枕手係會同個白波格一隻半手板噤遠...
太短反而會出唔倒低cue...=.="" |
|
|
|
lee0111
初哥級
Posts 1 |
Posted - 20.12.2003 : 22:31:06
|
other important point for screw back:
a) the grip - mean the power when you hold the cue, should be soft & loosen, when you hold the cue too hard, the distance for screw back will not too long even you use a large power to hit the ball.
b) the position for you hold the cue should be move forward when you decided to screw back.(about more than one hand distance from the end of the cue)
c) on the other hand, when the bridge too long, the accurcy for you hit the point for screw back may be reduce.
Thank you
|
|
|
打低Cue時, 個白波經常跳起, 點解 ?
