1 United Athle T-Shirt, Polo, Sweatshirt And Jacket 1
s
會員區 | Profile | Active Topics | Members | Private Message's | Search | FAQ
 All Forums
 Snooker.com.hk 《桌球論壇》
 波友吹水區
 To Keith~~ 有Printer 問題呀~		  New Topic  Reply to Topic  Printer Friendly
Author Previous Topic Topic Next Topic  

arsir
上校級會員

Hong Kong



Posts 3303

 Posted - 07.09.2004 :  09:51:58  Show Profile  Visit %s1%'s Homepagearsir  Send %s1% an ICQ Messagearsir  Click to see %s1%'s MSN Messenger addressarsir Send arsir a Private Message  Reply with Quote
我有部 hp1125c, 印出黎有橫間,如下圖
http://ftp2.tlmshk.edu.hk/~tllks/temp/1.jpg
換左新墨盒都係咁,就算用番個program 去清潔墨頭都係咁,另外我及覺printer 入面下圖紅圈果個位,有舊野,溶哂咁,唔知關唔關橫間事既呢? 如有關, 有無辦法可以整倒呢? 謝謝謝謝~~
http://ftp2.tlmshk.edu.hk/~tllks/temp/2.jpg

keith yau
中校級會員

Hong Kong



Posts 1545

 Posted - 07.09.2004 :  19:43:33  Show Profile  Click to see %s1%'s MSN Messenger addresskeith yau Send keith yau a Private Message  Reply with Quote
Sorry ar ..咁遲先覆你

以圖中所見應該係個 Service Station 太污糟，引致墨頭有 d 洞出唔到墨
做成 miss pin.

Action :
1) Replace Service Station (自己做唔到，我公司可幫你.....呵呵)
2) Adjust the alignment
Go to Top of Page

arsir
上校級會員

Hong Kong



Posts 3303

 Posted - 08.09.2004 :  01:18:19  Show Profile  Visit %s1%'s Homepagearsir  Send %s1% an ICQ Messagearsir  Click to see %s1%'s MSN Messenger addressarsir Send arsir a Private Message  Reply with Quote
謝謝你回覆先~~
最尾都係攪唔掂,叫左人黎整喇~~不過聽日先到~~
我發覺我屋企果個EPSON PHOTO 870 都有同樣既"SERVICE STATION" ,其實果舊野既作用係咩黎架? 吸墨汁? 1125C 果舊野真頭爛哂咁濟,其實係唔係吸水物質黎架? 咁咪一定要定期更換囉?
Go to Top of Page

simonlai
中校級會員

Hong Kong



Posts 1436

 Posted - 08.09.2004 :  01:18:44  Show Profile  Visit %s1%'s Homepagesimonlai  Send %s1% an ICQ Messagesimonlai  Click to see %s1%'s MSN Messenger addresssimonlai Send simonlai a Private Message  Reply with Quote
唔知幫唔幫到你！
我而家 office 用緊個 HP PRINTER 都好似你果部咁樣 (可能仲差)，
而我o既方法就係將成個墨頭拆出黎，
用火酒以唔甩毛o既綿布 "卒" 乾淨個墨頭就可以用半個月先要再洗過！
不過我唔知你用緊果個 printer o既型號可唔可以成個墨盒連頭一齊可
以甩出黎果隻喎？！ 如果甩得咁呢個方法就應該一定得！
Go to Top of Page

arsir
上校級會員

Hong Kong



Posts 3303

 Posted - 08.09.2004 :  01:23:57  Show Profile  Visit %s1%'s Homepagearsir  Send %s1% an ICQ Messagearsir  Click to see %s1%'s MSN Messenger addressarsir Send arsir a Private Message  Reply with Quote
多謝你提供既方法先呀~~
我用果款係噴墨架,個墨頭係個墨盒度,拆唔開架, 我試過睇佢個README, 用差唔多你既方法, 試左都係唔得~~一間間~~聽日果個維修人員黎到唔知佢會點整呢,到時再偷下師把喇~~~
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic  Printer Friendly
Jump To: