1 United Athle T-Shirt, Polo, Sweatshirt And Jacket 1
s
會員區 | Profile | Active Topics | Members | Private Message's | Search | FAQ
 All Forums
 Snooker.com.hk 《桌球論壇》
 二手 cue 買賣
 新CUE問題 新CUE買番黎係唔係就打得架啦 TIP頭D毛毛係咩黎 駛唔駛磨走佢		  New Topic  Reply to Topic  Printer Friendly
Author Previous Topic Topic Next Topic  

WESKER
初哥級

Posts 7

 Posted - 17.04.2003 :  03:58:48  Show Profile  Visit %s1%'s HomepageWESKER Send WESKER a Private Message  Reply with Quote
如題!!THX~~~

Dickson
隊長級會員

Hong Kong



Posts 10479

 Posted - 17.04.2003 :  11:22:38  Show Profile  Visit %s1%'s HomepageDickson  Send %s1% an ICQ MessageDickson Send Dickson a Private Message  Reply with Quote
新cue 買番o黎，正常係可以即刻打o架喇！除非支cue 有問題，
不過如果試過唔o岩打、唔o岩手感或者唔鍾意，你都唔會買啦！
打落再有問題就要慢慢自己習慣同調較喇！
例如︰tip頭o既軟硬、厚薄、圓扁及大小，cue 身o既"力架"、花紋........

跟cue o既tip 頭一般比較次，纖維鬆散，所以出現有毛毛的情況，
通常打兩板試完cue 就即刻換o左佢，費事眼冤。
Go to Top of Page

plyeah
少校級會員

Hong Kong



Posts 595

 Posted - 17.04.2003 :  14:53:54  Show Profile  Send %s1% an ICQ Messageplyeah Send plyeah a Private Message  Reply with Quote
咁可否解釋下各種tip 頭的分別。
Go to Top of Page

Dickson
隊長級會員

Hong Kong



Posts 10479

 Posted - 17.04.2003 :  16:59:41  Show Profile  Visit %s1%'s HomepageDickson  Send %s1% an ICQ MessageDickson Send Dickson a Private Message  Reply with Quote
恕我見識淺薄，請參考下列post，當中自有答案，Thx！
http://snooker.com.hk/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=346&forum=DCForumID4
http://snooker.com.hk/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=363&forum=DCForumID4
http://snooker.com.hk/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=348&forum=DCForumID4
http://snooker.com.hk/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=343&forum=DCForumID4
http://snooker.com.hk/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=339&forum=DCForumID4
http://snooker.com.hk/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=307&forum=DCForumID4
http://snooker.com.hk/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=239&forum=DCForumID4
http://snooker.com.hk/cgi-bin/dcforum/dcboard.cgi?az=read_count&om=223&forum=DCForumID4
Go to Top of Page

B.Hall
上校級會員

Hong Kong



Posts 3471

 Posted - 17.04.2003 :  17:27:51  Show Profile Send B.Hall a Private Message  Reply with Quote
好心機！
Go to Top of Page

WESKER
初哥級

Posts 7

 Posted - 18.04.2003 :  02:28:50  Show Profile  Visit %s1%'s HomepageWESKER Send WESKER a Private Message  Reply with Quote
咁自己換要D咩工具架
Go to Top of Page

MT
上校級會員

Hong Kong



Posts 3326

 Posted - 18.04.2003 :  14:48:43  Show Profile Send MT a Private Message  Reply with Quote
tomorrow la (Sat)..go to Billy...u got everything
Go to Top of Page

Dickson
隊長級會員

Hong Kong



Posts 10479

 Posted - 19.04.2003 :  00:10:42  Show Profile  Visit %s1%'s HomepageDickson  Send %s1% an ICQ MessageDickson Send Dickson a Private Message  Reply with Quote
Cutter、膠水、水磨沙紙(粗、中、幼)
Go to Top of Page

Edmund Choi
初青會員

Hong Kong



Posts 385

 Posted - 19.04.2003 :  00:39:56  Show Profile  Send %s1% an ICQ MessageEdmund Choi  Click to see %s1%'s MSN Messenger addressEdmund Choi  Send %s1% a Yahoo! MessageEdmund Choi Send Edmund Choi a Private Message  Reply with Quote
仲有cue 同埋 tip 頭呢…^_^
Go to Top of Page

WESKER
初哥級

Posts 7

 Posted - 19.04.2003 :  03:09:35  Show Profile  Visit %s1%'s HomepageWESKER Send WESKER a Private Message  Reply with Quote
咁換一粒TIP要幾耐 同埋換左要等幾耐先打得
THX~~~高手中既高手
Go to Top of Page

Edmund Choi
初青會員

Hong Kong



Posts 385

 Posted - 19.04.2003 :  23:32:38  Show Profile  Send %s1% an ICQ MessageEdmund Choi  Click to see %s1%'s MSN Messenger addressEdmund Choi  Send %s1% a Yahoo! MessageEdmund Choi Send Edmund Choi a Private Message  Reply with Quote
1:選擇一粒軟硬度達到你要求既 tip。沙紙向上、tip底向下，輕磨平tip底。cu銅咀都要清除舊膠水及輕磨平(如平面不平)。
2:在tip底及銅咀面塗上一層薄薄的“百得”萬能膠，等待一陣(嘆支煙咁上下時間啦...^_^)，然後把tip貼上銅咀。
3:cue尾向上，cue tip 向地面垂直咁握住、放鬆、握住、放鬆咁一下一下，好似 pot 波咁既情況，輕擊向地面，目的係迫走tip底同銅咀之間既空氣。
4:再等待一陣，大約十零廿分鐘都應該實架啦。咁就可以用cutter 切走tip多餘部分及用沙紙打磨需要形狀。
5:用得啦，pot 幾下波，感覺下粒 tip 好唔好，實唔實啦。^_^
Go to Top of Page
  Previous Topic Topic Next Topic  
 New Topic  Reply to Topic  Printer Friendly
Jump To: